Basit öğe kaydını göster

A shape memory alloy based on photodiode for optoelectronic applications

dc.contributor.authorAldirmaz, E.
dc.contributor.authorGuler, M.
dc.contributor.authorGuler, E.
dc.contributor.authorDere, A.
dc.contributor.authorTataroglu, A.
dc.contributor.authorAl-Sehemi, Abdullah G.
dc.contributor.authorAl-Ghamdi, Ahmed A.
dc.contributor.authorYakuphanoglu, F.
dc.date.accessioned2019-09-01T13:04:20Z
dc.date.available2019-09-01T13:04:20Z
dc.date.issued2018
dc.identifier.issn0925-8388
dc.identifier.issn1873-4669
dc.identifier.urihttps://dx.doi.org/10.1016/j.jallcom.2018.01.380
dc.identifier.urihttps://hdl.handle.net/20.500.12450/902
dc.descriptionWOS: 000427511200026en_US
dc.description.abstractA photodiode was fabricated as a Schottky contact using Cu-Al-Mn shape memory alloy and p-Si substrate. The alloy was characterized by some characterization techniques such as (SEM), XRD and DSC. The electrical and photovoltaic properties of the prepared Schottky diode were investigated under various illumination intensities and frequencies. The illumination dependent I-V measurements showed that the diode exhibited a photovoltaic behavior. The electronic parameters of the diode were obtained using various theoretical models. The photo transient behavior of the diode was analyzed under solar light. The admittance measurements indicate that the diode exhibits a dispersive capacitance behavior. The results indicate that the Schottky diode could be used in optic device applications. (c) 2018 Elsevier B.V. All rights reserved.en_US
dc.description.sponsorshipScientific Research Projects Unit of Amasya University [FMB-BAP 17-0250]; Scientific Research Projects Unit of Firat University [FF.17.21, FF.16.18]; King Khalid University under the (Research Center for Advanced Materials Science) at King Khalid University, Kingdom of Saudi Arabia [RCAMS/KKU/007-18]en_US
dc.description.sponsorshipThis study was supported by Scientific Research Projects Unit of Amasya University under grant No: FMB-BAP 17-0250. Also, the study was supported by Scientific Research Projects Unit of Firat University under grant No: FF.17.21 and FF.16.18. Authors would like to acknowledge the support of the King Khalid University for this research through a grant RCAMS/KKU/007-18 under the (Research Center for Advanced Materials Science) at King Khalid University, Kingdom of Saudi Arabia.en_US
dc.language.isoengen_US
dc.publisherELSEVIER SCIENCE SAen_US
dc.relation.isversionof10.1016/j.jallcom.2018.01.380en_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectSchottky diodeen_US
dc.subjectShape memory alloyen_US
dc.subjectIllumination effecten_US
dc.titleA shape memory alloy based on photodiode for optoelectronic applicationsen_US
dc.typearticleen_US
dc.relation.journalJOURNAL OF ALLOYS AND COMPOUNDSen_US
dc.authoridTataroglu, Adem -- 0000-0003-2074-574X;en_US
dc.identifier.volume743en_US
dc.identifier.startpage227en_US
dc.identifier.endpage233en_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.contributor.department-temp[Aldirmaz, E.] Amasya Univ, Fac Sci & Arts, Dept Phys, Amasya, Turkey -- [Guler, M. -- Guler, E.] Hitit Univ, Fac Sci & Arts, Dept Phys, Corum, Turkey -- [Dere, A. -- Yakuphanoglu, F.] Firat Univ, Nanosci & Nanotechnol Lab, Elazig, Turkey -- [Tataroglu, A.] Gazi Univ, Dept Phys, Fac Sci, Ankara, Turkey -- [Al-Sehemi, Abdullah G.] King Khalid Univ, Dept Chem, Fac Sci, POB 9004, Abha 61413, Saudi Arabia -- [Al-Sehemi, Abdullah G.] King Khalid Univ, Res Ctr Adv Mat Sci, POB 9004, Abha 61413, Saudi Arabia -- [Al-Sehemi, Abdullah G.] King Khalid Univ, Unit Sci & Technol, Fac Sci, POB 9004, Abha 61413, Saudi Arabia -- [Al-Ghamdi, Ahmed A.] King Abdulaziz Univ, Dept Phys, Fac Sci, Jeddah 21589, Saudi Arabiaen_US


Bu öğenin dosyaları:

DosyalarBoyutBiçimGöster

Bu öğe ile ilişkili dosya yok.

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster