dc.contributor.author | Ökten K. | |
dc.contributor.author | Natesan K. | |
dc.contributor.author | Biyikoğlu A. | |
dc.date.accessioned | 2024-03-12T19:35:19Z | |
dc.date.available | 2024-03-12T19:35:19Z | |
dc.date.issued | 2022 | |
dc.identifier.isbn | 9780735442320 | |
dc.identifier.issn | 0094243X | |
dc.identifier.uri | https://doi.org/10.1063/5.0116271 | |
dc.identifier.uri | https://hdl.handle.net/20.500.12450/2882 | |
dc.description | 3rd International Conference on Emerging Research in Civil, Aeronautical and Mechanical Engineering, ERCAM 2021 -- 16 December 2021 through 17 December 2021 -- -- 184730 | en_US |
dc.description.abstract | The fact that the energy produced by renewable sources cannot be consumed instantaneously has brought energy storage systems to the fore. Due to its low cost and ease of use, the thermally integrated pumped thermal energy storage (TI-PTES) system is widely used. In this study, unlike the literature, the Kaline cycle with TI-PTES system was investigated thermodynamically. In the system analysis, heat pump, evaporator and hot tank temperatures were selected as variable parameters and their effects on system performance were examined. The results showed that the system efficiency increases with the increase in evaporator temperature but the increase in hot tank temperature significantly reduces the system efficiency. © 2022 American Institute of Physics Inc.. All rights reserved. | en_US |
dc.language.iso | eng | en_US |
dc.publisher | American Institute of Physics Inc. | en_US |
dc.relation.ispartof | AIP Conference Proceedings | en_US |
dc.rights | info:eu-repo/semantics/openAccess | en_US |
dc.subject | Exergy | en_US |
dc.subject | Kalina cycle | en_US |
dc.subject | Round trip efficiency | en_US |
dc.subject | TI-PTES | en_US |
dc.title | Thermodynamic Analysis of Kalina Cycle with TI-PTES System | en_US |
dc.type | conferenceObject | en_US |
dc.department | Amasya Üniversitesi | en_US |
dc.identifier.volume | 2615 | en_US |
dc.relation.publicationcategory | Konferans Öğesi - Uluslararası - Kurum Öğretim Elemanı | en_US |
dc.identifier.scopus | 2-s2.0-85144115071 | en_US |
dc.identifier.doi | 10.1063/5.0116271 | |
dc.department-temp | Ökten, K., Amasya University, Faculty of Engineering and Architecture, Mechanical Engineering, Amasya, Turkey; Natesan, K., Nitte Meenakshi Institute of Technology, Karnataka, Bangalore Urban, India; Biyikoğlu, A., Gazi University, Faculty of Engineering and Architecture, Mechanical Engineering, Ankara, Turkey | en_US |
dc.authorscopusid | 57196280110 | |
dc.authorscopusid | 7801568869 | |
dc.authorscopusid | 55924543100 | |