Basit öğe kaydını göster

dc.contributor.authorAldirmaz, Emine
dc.contributor.authorAksoy, Ilhan
dc.date.accessioned2019-09-01T13:06:24Z
dc.date.available2019-09-01T13:06:24Z
dc.date.issued2014
dc.identifier.issn1319-8025
dc.identifier.issn2191-4281
dc.identifier.urihttps://dx.doi.org/10.1007/s13369-013-0871-z
dc.identifier.urihttps://hdl.handle.net/20.500.12450/1470
dc.descriptionWOS: 000329940300059en_US
dc.description.abstractIn this study, some physical and mechanical properties of martensitic transformation in Cu-9.97 % Al-4.62 % Mn (wt%) alloy were investigated by means of X-ray diffraction (XRD), scanning electron microscopy (SEM) and compression deformation test techniques. In SEM and XRD observations of Cu-9.97 % Al-4.62 % Mn alloy, two kinds of martensitic phases: thermally and deformation effect, and from DO3 parent phase, and the type of the produced martensite structures were noted.en_US
dc.language.isoengen_US
dc.publisherSPRINGER HEIDELBERGen_US
dc.relation.isversionof10.1007/s13369-013-0871-zen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectPhase transformationen_US
dc.subject18R martensiteen_US
dc.subject2H martensiteen_US
dc.subjectMechanical twinsen_US
dc.subjectDeformationen_US
dc.titleEffects of Heat Treatment and Deformation on 2H and 18R Martensites in Cu-9.97 % Al-4.62 % Mn Alloyen_US
dc.typearticleen_US
dc.relation.journalARABIAN JOURNAL FOR SCIENCE AND ENGINEERINGen_US
dc.identifier.volume39en_US
dc.identifier.issue1en_US
dc.identifier.startpage575en_US
dc.identifier.endpage580en_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.contributor.department-temp[Aldirmaz, Emine] Amasya Univ, Fac Sci & Arts, Dept Phys, Amasya, Turkey -- [Aksoy, Ilhan] Kirikkale Univ, Fac Sci & Arts, Dept Phys, Kirikkale, Turkeyen_US


Bu öğenin dosyaları:

DosyalarBoyutBiçimGöster

Bu öğe ile ilişkili dosya yok.

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster