Basit öğe kaydını göster

dc.contributor.authorAldirmaz, E.
dc.contributor.authorAksoy, I.
dc.date.accessioned2019-09-01T13:06:23Z
dc.date.available2019-09-01T13:06:23Z
dc.date.issued2014
dc.identifier.issn1450-5339
dc.identifier.urihttps://dx.doi.org/10.2298/JMMB120704004A
dc.identifier.urihttps://hdl.handle.net/20.500.12450/1467
dc.descriptionWOS: 000335009700014en_US
dc.description.abstractIn this study, some physical and mechanical properties in Cu-9.97%Al-4.62%Mn (wt%) alloy were investigated by X-ray diffraction (XRD), Scanning Electron Microscopy (SEM) and compression deformation test. Bainite phase were obtained in the samples according to SEM and XRD analyses. Compression stress was applied on the alloy in order to investigate the deformation effect on the bainite phase transformation. On the surface of the Cu-9.97%Al-4.62%Mn alloy after the deformation, both bainite and martensite variants formed.en_US
dc.language.isoengen_US
dc.publisherTECHNICAL FACULTY, BOR-SERBIAen_US
dc.relation.isversionof10.2298/JMMB120704004Aen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectBainiteen_US
dc.subjectPlastic Deformationen_US
dc.subjectScanning Electron Microscopy (SEM)en_US
dc.subjectX-ray Diffraction (XRD)en_US
dc.titleINVESTIGATION OF DEFORMATION AND MICROSTRUCTURE OF BAINITE IN Cu-9.97%Al-4.62% Mn ALLOYen_US
dc.typeletteren_US
dc.relation.journalJOURNAL OF MINING AND METALLURGY SECTION B-METALLURGYen_US
dc.identifier.volume50en_US
dc.identifier.issue1en_US
dc.identifier.startpage87en_US
dc.identifier.endpage90en_US
dc.relation.publicationcategoryDiğeren_US
dc.contributor.department-temp[Aldirmaz, E.] Amasya Univ, Fac Sci & Arts, Dept Phys, Amasya, Turkey -- [Aksoy, I.] Kirikkale Univ, Fac Sci & Arts, Dept Phys, Kirikkale, Turkeyen_US


Bu öğenin dosyaları:

DosyalarBoyutBiçimGöster

Bu öğe ile ilişkili dosya yok.

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster