Three-dimensional finite element model of friction drilling process in hot forming processes
Özet
Friction drilling processes are used commonly in hot forming operations. This process is similar to drilling processes but without using chip. This process is used especially for joining thin-walled metal components. In this study, the drilling process using centerdrill is investigated both experimentally and numerically. The finite element analyses (FEA) were conducted using deform-3D software based on finite element method (FEM). In this study, an analytic model is developed, which calculate the process parameters as torque and axial power, heat transfer coefficient. A comparison was also made for temperature, torque and axial force obtained from experimental and numerical analyses. At the end of the study, while the torque and axial force values decrease with increasing of spindle speed, temperature values of centerdrill and workpiece increase with increasing of spindle speed. A good consistency between both experimental and FEA simulations was found during the centerdrill process.
