Yazar "Akkuş, Harun" için listeleme
-
AISI 1040 çeliğinin tornalanması sonucu oluşan yüzey pürüzlülük değerlerinin RSM ve YSA ile araştırılması
Akkuş, Harun (Bilecik Şeyh Edebali Üniversitesi, 2020)Bu çalışmada, Design Expert programında yüzey yanıt metodu (RSM) Box-Behnken tasarımına göre deney listesi oluşturulmuştur. Oluşturulan deney listesine uygun olarak AISI 1040 çeliğinin tornalaması sonucu yüzey pürüzlülük ... -
Enhancement of Shear Strength in Lap Joints with Different Surface Patterns
Semiz, Levent; Akkuş, Harun; Yaka, Harun (2023)In this study, surface patterning with CNC vertical machining center was applied to aluminum surface for the enhancement of the shear strength of the epoxy bonded lap joints. It was found that the pattern shape affected ... -
Experimental and response surface methodology investigation of cast material obtained by melting and recycling of chips
Yaka, Harun; Akkuş, Harun (2021)In this study, it is aimed to draw attention to the new materials and recycling produced by the melt-casting process of chips in industry. For this purpose, the aluminum 5000 series material with 90 HB hardness was turned. ... -
Experimental and Statistical Investigation of Surface Roughness in Turning of AISI 4140 Steel
Akkuş, Harun (Sakarya Üniversitesi, 2019)In this study, AISI 4140 tempering steel with 48 HRc hardness was machined on CNC lathe with different cutting parameters and cooling environment. The Taguchi L9 test design was developed based on the three-level cutting ... -
Investigation of wear behavior of Ti-6Al-4V and AISI 316 L biomaterials with ball on disc test device
Akkuş, Harun; Kamış, Tahsin; Düzcükoğlu, Hayrettin (Dicle Üniversitesi, 2020)Ti-6Al-4V material is generally used in biomaterial applications. However, this material is difficult to supply and an expensive material. Instead of Ti-6Al-4V material; It is investigated whether the use of 316 L material ... -
Optimization of Turning Process By Using Taguchi Method
Akkuş, Harun; Yaka, Harun (Sakarya Üniversitesi, 2018)In this study, AISI 1040 steel is machined on CNC lathes. Taguchi L16 ortogonal array was used as experimental design. Experiments were carried out with selected the three cutting parameters. These parameters were determined ... -
Tabanca gövdeleri için metal ve polimer kompozit malzemelerin mekanik özelliklerinin incelenmesi
Akçakoca, Mustafa (Amasya Üniversitesi, 2023)Günümüzde tabanca gövdelerinin dizaynı ve üretimi yapılırken; çalışma mekanizmaları sebebiyle yüksek aşınmaya, dinamik yüklere ve korozyona maruz kaldıklarından üretiminde yüksek mukavemetli, korozyon aşınımı yüksek ...
